Twenty-Six 25mm to 32mm Variety Ring Adapters For GW style bases Warhammer & 40k

Description

Having spent all that time assembling, pinning, and basing a model only to find that now the standard base size for your model has increased can be discouraging. This kit includes multiple types of adapters that fit snugly over a standard 25mm base and increase its size to match that of a 32mm base. The outside size and height of the adapter have been confirmed to match 32mm bases.
This kit includes:
6 Hybrids adapters (12 pieces total): This two part adapter is designed to be used where the model is larger, and a ring will not safely fit over the model to the base. This adapter has a portion that fits under the model’s base and fit snugly with the original base edges. This style allows for heavier models as it will be supported both when lifting by the model or lifting by the adapter ring.
6 Insert adapters:
For use in upgrading bases where the model is larger. The current base attached to the model will fit into this insert adapter, updating its size from 25mm to 32mm.
7 Half Ring adapters (14 pieces total):
This two part adapter is designed to be used where the model is larger, and a ring will not safely fit over the model to the base. This adapter comes in two parts to be attached at the base to increase its size from 25m to 32mm.
7 Ring adapters:
For use in upgrading bases where the model is smaller, where the ring can fit over the model and slide down to the base.
This Adapter Ring will not fit over the bottom of standard bases so must be applied from the top.
Compatible with all Warhammer and Warhammer 40k style round 25mm bases.
This includes 26 adapters, 39 pieces in total.
Item will need to be glued in place for proper use.
Item will be shipped next business day after receiving payment. Will be shipped in a sealed bag placed into small envelope.
Note: Items may require sanding and other touch ups due to 3D printing manufacturing. Multiple base colors available but any choice is paintable to desired color. See bottom for additional instructions.
Possible Uses:
Making 25mm bases 32mm
Marking firing arcs for Shadow Wars: Armageddon
Differentiating with multiple colors between multiple large units (e.g Conscripts, Boyz, Termagants)
Framing for fancy terrain bases
This product will allow exploration and determination of which adapter will best suit needs going forward. If many hundred are needed, you can get the type that will work for you after trying them all.
General Instructions for Painting:
I recommend gap filling primer, generally this is an auto primer, on 3D printer parts. After priming, can be painted with same paints as plastic models (acrylics).
General Instructions for Gluing:
Super glue is recommended. I prefer Loctite 40140, which is a surface insensitive glue, for when I glue 3D printed parts. This generates a strong hold.
General Plastic Information:
The parts are printed in PLA (polylactic acid) which is a natural, nontoxic, biodegradable, plastic. As such, it has a lower melting and warping point. I would advise not leaving in areas where temperature will exceed 140 F / 60 C, or leaving in direct sunlight. Painting and sealing will provide protection from sun rays, which may degrade the plastic over time, which is actually similar to other plastic parts. The plastic, being fused filament deposit (FFD) manufacturing will also “absorb” water and paint into the lines between layers. This is standard for all FFD printed models.
Any questions, do not hesitate to ask. I will get back to you within 12 hours, often times within minutes.
Made with pride by someone who also plays Warhammer 40k.
Product may be intermittently updated for improved ease of use or quality as testing and feedback dictates.
Other Products:
Hybrid Ring Adapters
Ring Adapters
Half-Ring Adapters
Insert Adapters
Bases:
25mm Roman Numeral
32mm Roman Numeral